About the Association
The Association of Building Inspection and Design (ABID) is a national professional association dedicated to advancing the practice of building inspection, investigation, and design. Through collaboration, continuing education, and professional standards, the Association supports the engineers, architects, inspectors, and building professionals responsible for protecting the integrity of the built environment.
Our Mission & Vision
Advancing Excellence in Building Inspection and Design
Our Mission: ABID’s mission is to advance the practice of building inspection and design by fostering professional collaboration, knowledge sharing, and continuing education among practitioners across the building consultant environment.
The Association exists to support its members through high-quality technical programming, meaningful peer engagement, and industry partnerships that elevate professional standards and practical outcomes.
Our Vision: ABID envisions a connected, engaged, and growing professional community where building inspection and design professionals are recognized as essential contributors to the safety, performance, and resilience of the built environment.
The Association seeks to be the trusted national platform for business development, collaboration, and thought leadership for design and building professionals.
Core Value Pillars
The Principles That Guide ABID
Professional
Community
We believe the profession is strongest when practitioners are connected. ABID prioritizes peer-to-peer engagement, committee participation, and member-driven contributions to create a collaborative professional network.
Practical
Education
Education should be relevant, applied, and practitioner-led. ABID emphasizes real-world case studies, technical insight, and business knowledge through conferences, webinars, and focused learning opportunities.
Professional Growth
& Inclusion
The Association is committed to expanding and diversifying its membership across disciplines, career stages, and regions. ABID actively works to attract younger professionals and broaden participation throughout the industry.
Industry
Engagement
ABID values responsible collaboration with industry partners, vendors, and allied organizations to enhance education, resources, and professional relevance while maintaining independence and member-focused priorities.
Organizational Sustainability
The Association is committed to transparent governance, diversified funding, and sustainable operations. ABID recognizes that long-term success depends on active membership, strategic partnerships, and accountable leadership.
PROFESSIONAL LEADERSHIP
Standards, Education, and Leadership
ABID is committed to supporting high standards within the profession through practical education, responsible leadership, and industry collaboration.
The Association emphasizes real-world learning through technical presentations, case studies, conferences, webinars, and professional discussion. Members benefit from access to experienced professionals and applied insight that can be directly incorporated into their work.
ABID also recognizes the importance of industry leadership and long-term professional stewardship. Through active participation, committee involvement, and collaboration with allied organizations, the Association works to strengthen both the profession and the broader building consultant community.
LEADERSHIP TEAM
Meet the Board of Directors

Aaron Parks
AIA, NCARB, LEED AP
Show More
Aaron Parks earned his Bachelor of Architecture degree from the University of Kentucky in 1999. He earned his Master of Science degree in Natural Resources and Environmental Science from the University of Illinois at Urbana-Champaign in 2012.
Mr. Parks joined Waldman Engineering Consultants in 2017. Prior to joining Waldman Engineering Consultants, he owned and managed his own architecture practice for 8 years. Mr. Parks’ early career was spent building knowledge and expertise at full-service design firms in Chicago, working on a variety of large-scale projects across the U.S. and overseas.
Mr. Parks has been a licensed architect for 17 years and has been providing a wide range of professional architectural services for over 25 years. His primary areas of focus have been residential design, healthcare, high-rise buildings, and industrial building design.
Mr. Parks is a licensed architect in the States of Illinois, Wisconsin, and South Carolina, is a member of the American Institute of Architects, certified by the National Council of Architecture Registration Boards, a LEED (Leadership in Energy and Environmental Design) accredited professional, and a Professional Affiliate Member of NABIE (National Academy of Building Inspection Engineers).

Edward G. Robinson
Professional Engineer
Show More
Edward G. Robinson, P.E., is the president and owner of Professional Engineering Inspections, Inc. a Texas based building inspection firm, where he has led residential and commercial inspection services in the Houston area since 1999. He has more than three decades of experience in mechanical, electrical, and structural inspections of residential and commercial construction, including litigation support and specialized training in infrared thermography, blower door diagnostics.

Heidi Klein
MCE, P.E.
Show More
Heidi Klein is a Forensic Engineer based out of Denver, Colorado. Heidi received her Bachelor of Science in Civil Engineering from the Colorado School of Mines and her Master of Civil Engineering (Structural) from Johns Hopkins University. Heidi is a licensed professional engineer in 15 states (Arizona, Colorado, Florida, Idaho, Illinois, Iowa, Maryland, Mississippi, Montana, Nevada, New Mexico, North Dakota, Texas, Washington, and Wyoming) and has qualified to provide expert testimony in forensic engineering, civil and structural engineering, building envelopes, roofing, windows/doors, and cost of repair/damages. Heidi has additional certifications as a Haag Certified Reviewer, a member of the Cal OES Safety Assessment Program, and a Certified Inspector from the Exterior Design Institute and she has served as an Advisor for the Women in Leadership Certificate Program at University of Colorado – Colorado Springs. Heidi’s experience additionally includes forensic engineering related to property claims, construction defect, premises liability, seller’s disclosure disputes, and third-party construction observations.

Victor G. Hare
Professional Engineer
Show More
Mr. Hare is a licensed, professional civil engineer in Maryland and Virginia. He has been President of AmeriStruct-HARE Engineering LLC, a consulting engineering business, for over 40 years. His firm provides building inspections, structural repair designs, and court expert witness testimony.
Also, Mr. Hare worked for 10 years at the Department of Homeland Security, Federal Emergency Management Agency (FEMA) primarily in infrastructure disaster mitigation. He worked with engineers, architects, and lawyers providing technical advice to promote more resilient repair or replacement of disaster-damaged public facilities.
Mr. Hare received his Bachelor of Science degree in Civil Engineering from Purdue University in West Lafayette, Indiana and a Master of Arts degree in Legal Studies from the University of Baltimore, Maryland.

Greg Lason
Professonal Engineer
Show More

David H. Dotson
P.E., R.S., B.I.E.
Show More
David H. Dotson, P.E., R.S., B.I.E. – Owner of Criterium – Dotson Engineers, has a B.S. in Architectural Engineering from the University of Texas at Austin and is a State of Texas Registered Professional Engineer in the structural discipline. Mr. Dotson has extensive experience in the inspection and evaluation of thousands of commercial and multifamily properties and provided architectural and structural design of residential, commercial, and church buildings. Mr. Dotson has also achieved the designation of Reserve Specialist (RS) through the Community Associations Institute, is a certified Building Inspection Engineer (BIE), and is a member of the National Society of Professional Engineers (NSPE), and Texas Society of Professional Engineers (TSPE).

Catherine Jones
CITE, CMP, CMM, MA, MBA
Show More
Catherine is a seasoned incentive professional with over 30 years’ experience in the incentive industry and has worked closely with non-profit associations to grow membership, revolutionize offerings and to revitalize annual meetings. In 2003, Catherine founded The Edventives Group to provide customized, turnkey meetings, incentives and travel programs for clients requiring customized solutions.
Previous to her career in the incentive industry, Catherine attended Southern Methodist University in Dallas, Texas. Catherine holds both a Master of Arts in History as well as a Master’s of Business Administration from the Cox School of Business at Southern Methodist University.

Robert Roop
Professional Engineer
Show More
Mr. Robert Roop, P.E., is the founder of Lockatong Engineering, Inc. He has a Bachelor of Science in Mechanical Engineering from Tufts University and a Master of Science in Environmental Engineering from Villanova University. His work experience includes over 50 years of experience in facility and environmental engineering, investigations, technical feasibility studies, prototype/pilot plant design and evaluation, final design and installation of processes and commercialization of product, design of repairs, improvements, and enhancements to improve efficiency, occupant comfort and life extension in existing structures, indoor air quality investigation, design of HVAC system upgrades and maintenance programs, private residential, commercial (office, residential, light industrial) and institutional facilities such as schools and hospitals. He is a licensed Professional Engineer in NJ, PA, and NY. Mr. Roop is the Past President of the National Academy of Building Inspection Engineers and currently serves on the Council on Policy and Advocacy Committee for the National Society of Professional Engineers.
THE SIGMAN FUND
Honoring a Legacy. Investing in the Future of the Profession.
The Sigman Fund was established to honor the life and legacy of Theodore “Ted” Sigman, P.E., a respected leader, past president of the National Academy of Building Inspection Engineers, and a professional known for his ethics, integrity, and dedication to the field.
Through his will, Ted created a lasting gift to support the advancement of building inspection and engineering, ensuring that future generations benefit from the same commitment to excellence that defined his career.
Today, the Sigman Fund supports educational programming, student participation, professional development, and initiatives that strengthen the future of building inspection and design.
PURPOSE OF THE FUND
Carrying Ted Sigman’s Legacy Forward
Educational Programming
Supports high-quality speakers, technical presentations, and educational sessions at ABID conferences and events.
Student Support
Provides financial assistance, sponsorships, and opportunities for students and emerging professionals.
Professional Development
Helps fund new educational initiatives that strengthen skills, knowledge, and industry standards.
Ethical Leadership
Upholds the values of integrity, service, and professional excellence that defined Ted Sigman’s career.
Connect With ABID
Whether you’re interested in becoming a member, attending an upcoming event, or learning more about the Association, we welcome the opportunity to connect.
Website Designed By Charles Choate Creative, LLC.
© 2026 All rights reserved.




